Supero 5018A-FTN4, User Manual

Page: 94 / 114

7-22
S
UPER
S
ERVER 5018A-FTN4 User's Manual
Note
: The system will reboot for the change on TPM State to take effect.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for TPM support. The options are
None
, Enable Take Ownership, Disable
Take Ownership, and TPM Clear.
Note:
The computer will reboot to carry out a pending TPM operation and change
TPM state for a TPM device.
Current Status Information
This feature indicates the status of the following TPM items:
TPM Enabled Status
TPM Active Status
TPM Owner Status
Intel TXT (LT) Support
Intel TXT (Trusted Execution Technology) helps protect against software-based
attacks to ensure the security, con
fi dentiality, and integrity of all data stored in the
system. The options are Enabled and
Disabled.

Super IO Confi guration
Super IO Chip AST2400

Serial Port 0 Confi guration /Serial Port 1 Confi guration
This submenu allows the user the con fi gure settings of Serial Port 1 or Serial Port 2.
Serial Port
Select Enabled to enable the a selected onboard serial port. The options are
En-
abled
and Disabled.
Device Settings
This item displays the status of a serial part speci fi ed by the user.
Change Settings
This feature speci fi es the base I/O port address and the Interrupt Request address
of a serial port speci fi ed by the user. Select Auto to allow the BIOS to automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are
Auto
, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).