Supero 5018A-FTN4, User Manual

Page: 81 / 114

Chapter 7: BIOS
7-9
AES-NI
Select Enabled to use the Advanced Encryption Standard in the processor. The
options are
Enabled
and Disabled
.
PECI Enable
Select Enabled to enable PECI (Platform Environment Control Interface) support,
which will enhance CPU thermal management to achieve power ef
fi ciency. The
options are
Disabled
and Enabled
.
PECI Trusted
Select Enabled to support Trusted Platform Environment Control Interface to im-
prove CPU thermal management. The options are
Disabled
and Enabled
.
PECI SMBus Speed
Use this feature to set the speed for the physical bus to operate. The options are
Standard (80 kHz)
, Standard (100 kHz), Fast Mode (400 kHz), and Fast Mode
Plus (1 MHz).
Turbo (Available if Intel® EIST technology is Enabled)
This feature allows processor cores to run faster than marked frequency in speci fi c
conditions. The options are Disabled and
Enabled.
RAPL
Select Enabled to enable RAPL (Running Average Power Limit) support. Use the
keyboard to enter your default setting
.
MSR 606 PKG_POWER_SKU_UNIT
Use the keyboard to enter the number of the computer units that are SKU-speci fi c
in terms of power, energy, and time are concerned. .
MSR 610 PKG_TURBO_PWR_LIM
Use this feature to specify the processor power consumption limits during short
and long duration.
MSR 670 PKG_TURBO_CFG1
Use this feature to specify various parameters of system components such as Turbo,
Minimum Energy, SoC TDP Policy, ICMax Control, and Turbo Mode.
MSR 672_TURBO_WKLD_CFG2
Use this feature to specify ICCMax Throttle Ratio for C6 Exits when the value of
PKG_TURBO_CFG1 [4:3] equals to 10Y.