Supero 5018A-FTN4, User Manual

Page: 47 / 114

Chapter 5: Advanced Motherboard Setup
5-5
Module Notch
Module Notch
Module Key
Socket Key
5-6 Adding PCI Add-On Cards
The 5018A-FTN4 can accommodate a single RSC-RR1U-E8 riser card to support
a PCI-E x8 add-on card
Installing an Add-on Card
1. Begin by removing the shield for the PCI slot where the riser card is located.
2. Fully seat the card into the riser card, pushing down with your thumbs evenly
on both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
Figure 5-3. Installing DIMMs