Supermicro X12SPG-NF User Manual Download Page 77

Page: 77 / 112

Chapter 4: BIOS

MMCFG Base

Use this feature to select the low base address for PCIe adapters to increase base memory.
The options are 1G, 1.5G, 1.75G, 2G, 2.25G, 3G, and

Auto

NVMe Firmware Source

The feature determines which type of NVMe firmware should be used in your system. The

options are

Vendor Defined Firmware

and AMI Native Support.

VGA Priority

Use this feature to select VGA priority when multiple VGA devices are detected. Select

Onboard to give priority to your onboard video device. Select Offboard to give priority to your

graphics card. The options are

Onboard

and Offboard.

Onboard Video Option ROM

Use this feature to select which firmware function to be loaded for LAN1 used for system

boot. The options are Disabled and

Legacy

(if the Boot Mode Select feature under the Boot

tab is set to Legacy), Disabled and

EFI

(if the Boot Mode Select feature under the Boot tab

is set to UEFI), and Disabled,

Legacy

, and EFI (if the Boot Mode Select feature under the

Boot tab is set to Dual).

RSC-GB-6G4 SLOT1 PCI-E 4.0 x16 OPROM/RSC-GF-6G4 SLOT1 PCI-E 4.0 X16

OPROM/RSC-GF-6G4 SLOT1 PCI-E 4.0 X16 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in these slots.

The options are Disabled and

Legacy

(if the Boot Mode Select feature under the Boot tab is

set to Legacy), Disabled and

EFI

(if the Boot Mode Select feature under the Boot tab is set

to UEFI), and Disabled,

Legacy

, and EFI (if the Boot Mode Select feature under the Boot

tab is set to Dual).

M.2-H_1 OPROM/M.2-H_2 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled and

Legacy

(if the Boot Mode Select feature under the Boot tab is

set to Legacy), Disabled and

EFI

(if the Boot Mode Select feature under the Boot tab is set

to UEFI), and Disabled,

Legacy

, and EFI (if the Boot Mode Select feature under the Boot

tab is set to Dual).

AOC-ATG-i2T LAN1 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled and

PXE

(if the Boot Mode Select feature under the Boot tab is

set to Legacy), Disabled and

EFI

(if the Boot Mode Select feature under the Boot tab is set

to UEFI), and Disabled, EFI, and

PXE

(if the Boot Mode Select feature under the Boot tab

is set to Dual).

Summary of Contents for X12SPG-NF

















































































































Search results

Summary of Contents for X12SPG-NF

Reviews:

Related manuals for X12SPG-NF

Brands by name

Popular brands

Supermicro X12SPG-NF, User Manual

Search results

Summary of Contents for X12SPG-NF

Reviews:

Related manuals for X12SPG-NF

Brands by name

Popular brands