Supermicro X12SPG-NF User Manual Download Page 71

Page: 71 / 112

Chapter 4: BIOS

AIOM1 PCI-E 4.0 x8 VMD

Use this feature to enable or disable AIOM1 for this port. The options are

Disable

and Enable.

Hot Plug Capable

Use this feature to enable or disable hot plug for this port. The options are

Dis-

able

and Enable.

VMD Config for IOU 1

Enable/Disable VMD

Use this feature to enable or disable the volume management device for this stack.
The options are

Disable

and Enable.

*If the feature above is set to Enable, the following features are available for

configuration:

RSC-GB-6G4 SLOT1 VMD

Use this feature to enable or disable the device for this port. The options are

Dis-

able

and Enable.

Hot Plug Capable

Use this feature to enable or disable hot plug for this port. The options are

Dis-

able

and Enable.

VMD Config for IOU 3

Enable/Disable VMD

Use this feature to enable or disable the volume management device for this stack.
The options are

Disable

and Enable.

*If the feature above is set to Enable, the following features are available for

configuration:

RSC-GF-6G4 SLOT1 VMD

Use this feature to enable or disable volume management device for this port. The
options are

Disable

and Enable.

Hot Plug Capable

Use this feature to enable or disable hot plug for this port. The options are

Dis-

able

and Enable.

Summary of Contents for X12SPG-NF

















































































































Search results

Summary of Contents for X12SPG-NF

Reviews:

Related manuals for X12SPG-NF

Brands by name

Popular brands

Supermicro X12SPG-NF, User Manual

Search results

Summary of Contents for X12SPG-NF

Reviews:

Related manuals for X12SPG-NF

Brands by name

Popular brands