manualshive.com logo in svg

Supermicro X12SPG-NF, User Manual

The Supermicro X12SPG-NF User Manual is a comprehensive and essential guide for utilizing the features and functionalities of this high-performance motherboard. Easily download your free manual from our website to unlock the full potential of your Supermicro X12SPG-NF without any hassle.

Share
Download
background image

Appendix B: Software

109

A.4 IPMI

The 10th Generation Intel Xeon, Core™ i3, Pentium, Celeron supports the Intelligent Platform 
Management Interface (IPMI). IPMI is used to provide remote access, monitoring and 
management. There are several BIOS settings that are related to IPMI.
Supermicro ships standard products with a unique password for the BMC ADMIN user. This 
password can be found on a label on the motherboard. For general documentation and 
information on IPMI, please visit our website at 

https://www.supermicro.com/en/support/

BMC_Unique_Password.

Summary of Contents for X12SPG-NF

















































































































Reviews:

No comments

Related manuals for X12SPG-NF

J&W JW-A870T-UC3 User Manual preview
JW-A870T-UC3
Brand: J&W Pages: 40
Microchip Technology MCP1012 User Manual preview
MCP1012
Brand: Microchip Technology Pages: 44
WynMax Atom D2550 User Manual preview
Atom D2550
Brand: WynMax Pages: 68
onsemi NB7NPQ1102MCMUGEVB User Manual preview
NB7NPQ1102MCMUGEVB
Brand: onsemi Pages: 7
Abit KN9S User Manual preview
KN9S
Brand: Abit Pages: 72
iWave i.MX 8M Mini SODIMM SOM Quick Start Manual preview
i.MX 8M Mini SODIMM SOM
Brand: iWave Pages: 16
STMicroelectronics STEVAL-LLL002V1 User Manual preview
STEVAL-LLL002V1
Brand: STMicroelectronics Pages: 29
IEI Technology WAFER-BW-N4-R10 User Manual preview
WAFER-BW-N4-R10
Brand: IEI Technology Pages: 136
Portwell WADE-8170 Quick Installation Manual preview
WADE-8170
Brand: Portwell Pages: 9
Texas Instruments BQ25887 User Manual preview
BQ25887
Brand: Texas Instruments Pages: 23
DFI ST2K Series User Manual preview
ST2K Series
Brand: DFI Pages: 92
ASROCK Fatal1ty Z77 Professional-M Instructiontion preview
Fatal1ty Z77 Professional-M
Brand: ASROCK Pages: 245
Bosch Worcester TDS 300 Installation And Operating Instructions Manual preview
Worcester TDS 300
Brand: Bosch Pages: 84
Bosch D5060 User Manual preview
D5060
Brand: Bosch Pages: 4
ASROCK FM2A88X Pro User Manual preview
FM2A88X Pro
Brand: ASROCK Pages: 66
Bluetechnix TIM-UP-19kS3-Spartan6 Quick Start Manual preview
TIM-UP-19kS3-Spartan6
Brand: Bluetechnix Pages: 19
DFI-ITOX SB331-IPM User Manual preview
SB331-IPM
Brand: DFI-ITOX Pages: 155
Digilent NetFPGA-SUME Reference Manual preview
NetFPGA-SUME
Brand: Digilent Pages: 19

Brands by name

Popular brands

Load more brands