manualshive.com logo in svg

Supermicro SuperWorkstation 5039C-T, User Manual, Page: 80 / 111

Share
Download
Supermicro SuperWorkstation 5039C-T User Manual Download Page 80

SuperWorkstation 5039C-T User's Manual

80

6.6   Boot

Use this tab page to configure 

Boot Settings.

Setup Prompt Timeout

This feature controls how long (in seconds) the boot process will wait for the Setup Activation 
key (normally <Delete>) to be pressed before moving on. The default is 

1

.

Boot mode select

Use this feature to select the boot mode. The options are LEGACY, UEFI, and 

DUAL

.

FIXED BOOT ORDER Priorities

Use this feature to set the boot order priority. The number of boot options shown is dependent 
on the boot mode selected (above).

Delete Boot Option

This feature removes an EFI boot option from the boot order.

Delete Driver Option

This feature removes an EFI driver option from the driver order.

UEFI Application Boot Priorities 

NETWORK Drive BBS Priorities

This  feature  allows  the  user  to  specify  the  boot  device  priority  sequence  from  a  specified 

drive device.

Summary of Contents for SuperWorkstation 5039C-T
















































































































Reviews:

No comments