manualshive.com logo in svg

Supermicro SuperWorkstation 5039C-T, User Manual, Page: 54 / 111

Share
Download
Supermicro SuperWorkstation 5039C-T User Manual Download Page 54

SuperWorkstation 5039C-T User's Manual

54

6.3  Advanced Setup Configurations

Use the arrow keys to select the Advanced tab and press <Enter> to access the submenu 
items.

Caution

: Take caution when changing the Advanced settings. An incorrect value, a very high 

DRAM frequency, or an incorrect DRAM timing setting may make the system unstable. If this 
occurs, revert to the manufacture default settings.

Boot Feature

Fast Boot

This feature enables the system to boot with a minimal set of required devices to launch. This 
has no effect on BBS boot options. The options are 

Disabled

 or Enabled.

Quiet Boot

Use this feature to select the screen display between the POST messages and the OEM logo 
upon bootup. Uncheck the box to display the POST messages. Check the box to display the 
OEM logo instead of the normal POST messages. The default is 

Checked

.

Bootup NumLock State

Use this feature to set the Power-on state for the <Numlock> key. The options are 

On

 or Off.

Summary of Contents for SuperWorkstation 5039C-T
















































































































Reviews:

No comments