SuperWorkstation 5039C-T User's Manual
70
EMS Console Redirection
Select Enabled to enable Emergency Out-of-Band Management Console Redirection, which
will allow a client machine to be connected to a host machine at a remote site for networking.
The options are
Unchecked
(Disabled) and Checked (Enabled).
*If the item above set to Enabled, the following items will become available for
configuration:
Console Redirection Settings
Out-of-Band Mgmt Port
This feature controls which port Emergency Management Services (EMS) is allowed to
remotely manage a Windows server operating system. The options are
COM1
or SOL.
EMS Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set. Select
VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The
options are ANSI, VT100, VT100+, and
VT-UTF8
.
EMS Bits per second
Use this feature to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 57600, and
115200
(bits per second).
EMS Flow Control
Use this feature to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The
options are
None
, Hardware RTS/CTS, and Software Xon/Xoff.
Data Bits
Parity
Stop Bits
SATA And RST Configuration
SATA Controller(s)
This feature enables SATA device(s). The options are Disabled or
Enabled
.
SATA Mode Selection
This feature controls the SATA mode. The options are
AHCI
or RAID.