manualshive.com logo in svg

Supermicro SuperWorkstation 5039C-T, User Manual, Page: 71 / 111

Share
Download
Supermicro SuperWorkstation 5039C-T User Manual Download Page 71

Chapter 6: BIOS

71

Aggressive LPM Support

This feature enables the PCH to aggressively enter link power state. The options are Disabled 
or 

Enabled

.

Storage Option ROM/UEFI Driver

This feature controls the execution of UEFI and legacy storage OpROM. The options are Do 
not launch, UEFI, and 

Legacy

.

Serial ATA Port 0~7 

Hot Plug

This  feature  designates  the  port  specified  for  hot  plugging.  Set  this  item  to  Enabled  for 

hotplugging support, which will allow the user to replace a SATA disk drive without shutting 
down the system. The options are Disabled or 

Enabled

.

Spin Up Device

When this feature is disabled, all drives will spin up at boot. When this option is enabled, it will 
perform Staggered Spin Up on any drive this option is activated. The settings are 

Disabled

 

or Enabled.

SATA Device Type

Use this feature to identify the type of HDD that is connected to the SATA port. The options 
are 

Hard Disk Drive

 and Solid State Drive.

PCH-FW Configuration

The following information is displayed:

ME Firmware Version 

ME Firmware Mode 

ME Firmware SKU
ME FW Image Re-Flash

This feature enables ME FW Image Re-Flash function. The options are 

Disabled

 or Enabled.

Manageability Features State 

(X11SCA/-W only)

This feature enables Intel® Manageability features in FW. The options are Disabled or 

Enabled

.

AMT BIOS Features 

(X11SCA/-W only)

This feature enables AMT BIOS features. When set to Disabled, MEBx Setup access is no 
longer available, as well as the following submenu. The options are 

Disabled

 or Enabled.

Summary of Contents for SuperWorkstation 5039C-T
















































































































Reviews:

No comments