SuperWorkstation 5039C-T User's Manual
36
Power Supply
The power supply is auto-switching capable. This feature enables it to automatically sense
the input voltage and operate at 100-240v.
Changing the Power Supply
1. Remove power from the system as described in section 3.1, and remove the left chassis
cover.
2. Disconnect the cables from the motherboard and other devices to the power supply.
3. Remove the screws securing the power supply to the chassis, which are located on the
rear of the chassis. Save the screws for later use.
4. Lift the power supply out of the chassis.
5. Replace the failed power supply with an identical power supply model.
6. Secure the new power supply using the screws previously saved.
7. Reconnect the cables from the motherboard and other devices to the power supply.
8. Plug the AC power cord back into the module and power-up the system.
Figure 3-14. Replacing a Power Supply Module
Power Supply