manualshive.com logo in svg

Supermicro SuperServer SYS-210TP-HPTR, User Manual, Page: 14 / 153

Share
Download
Supermicro SuperServer SYS-210TP-HPTR User Manual Download Page 14

14

Chapter 1: Introduction

LAN Speed Indicator

One LED indicates the network speed. 

LAN LED (Speed Indicator)

Color

Speed

Green

10Gbps

Amber

1Gbps

Off

100Mbps or less

Expansion Slots and Riser Cards

This system offers options for riser cards that provide custom PCIe 4.0 capabilities.

PCIe Riser Cards

Position*

Part Number

Slot Description 

Right side 

(SXB3)

RSC-PR-6-X2

1

x16 low-profile

Left side 

(SXB4)

RSC-P-6G4

2

x16 low-profile 

       *Position in the node tray when looking from the back of the server.

Power Supply Indicator

LEDs on the power supplies indicate the status of the module.

Power Supply Indicator

LED Color and State

Power Supply Condition

Solid Green

Indicates that the power supply is on

Blinking Green

Indicates that the power supply is plugged in and turned off by the system.

Blinking Amber

Indicates that the power supply has a warning condition and continues to operate.

Solid Amber

Indicates that the power supply is plugged in, and is in an abnormal state. The 

system might need service. Please contact Supermicro technical support.

Off

No AC power to modules

Summary of Contents for SuperServer SYS-210TP-HPTR


























































































































































Reviews:

No comments