Supermicro SuperServer SYS-210TP-HPTR, User Manual, Page: 11 / 153

11
Chapter 1: Introduction
1.2 System Features
The following views of the system display the main features. Refer to Appendix B for additional
specifications.
Front View
Figure 1-1. Front View
Logical Storage Drive Numbers
Item Description
0 - 5 2.5" hot-swap SATA drive bays (each node)
Drive Carrier Indicators
Each drive carrier has two LED indicators: an activity indicator and a status indicator. For RAID
configurations using a controller, the meaning of the status indicator is described in the table
below. For OS RAID or non-RAID configurations, some LED indications are not supported,
such as hot spare. For VROC configurations, refer to the
VROC section in this manual.
Drive Carrier LED Indicators
Color Blinking Pattern Behavior for Device
Activity
LED
Blue Solid On Idle drive installed
Blue Blinking I/O activity
Off Idle SATA or no drive
Status
LED
Red Solid On Failure of drive with RSTe support
Red Blinking at 1 Hz Rebuild drive with RSTe support
Red Blinking at 4 Hz Identify drive with RSTe support
Red Blinking with two blinks
and one stop at 1 Hz
Hot spare for drive with RSTe support
Red On for five seconds,
then off
Power on for drive with RSTe support
A0 A2 A1 A4 A3 A5 B0 B2 B1 B4 B3 B5 C0 C2 C1 C4 C3 C5 D0 D2 D1 D4 D3 D5
Node A Node B Node C Node D