manualshive.com logo in svg

Supermicro SuperServer 620BT-HNC8R, User Manual, Page: 54 / 123

Share
Download
Supermicro SuperServer 620BT-HNC8R User Manual Download Page 54

54

Chapter 3: Maintenance and Component Installation

Hot-Swap for NVMe Drives

Supermicro servers support NVMe surprise hot-swap. For even better data security, NVMe 

orderly

 hot-swap is recommended. NVMe drives can be ejected and replaced remotely using 

BMC.

Note

: If you are using VROC, see the 

Hot-Swap Drives

 section in Appendix C instead.

Ejecting a Drive

1. 

BMC > System > Storage Monitoring > Physical View

2. Select Device, Group and Slot, and click 

Eject

. 

After ejecting, the drive Status LED 

indicator turns green.

3. Remove the drive.

Note that 

Device

 and 

Group

 are categorized by the CPLD design architecture. The 

620BT-H Series server has one Device and one Group.

Slot

 is the slot number on which the NVMe drives are mounted.

Replacing the Drive

1. Insert the replacement drive.

2. 

BMC > System > Storage Monitoring > Physical View

3. Select Device, Group and slot and click 

Insert

. The drive Status LED indicator flashes 

red, then turns off. The Activity LED turns blue.

Figure 3-11. BMC Screenshot

Summary of Contents for SuperServer 620BT-HNC8R




























































































































Reviews:

No comments