42
Chapter 3: Maintenance and Component Installation
Remove the Carrier Assembly from the Heatsink
To remove the processor carrier assembly from the PHM, please follow the steps below:
1. Detach the four plastic clips (marked a, b, c, d) on the processor carrier assembly from
the four corners of the heatsink (marked A, B, C, D) as shown below.
2. When all plastic clips have been detached from the heatsink, remove the processor
carrier assembly from the heatsink.
A
B
C
D
a
b
c
d
Pin1
Pin1
Processor Carrier Assembly
Heatsink