Supermicro SuperServer 620BT-HNC8R, User Manual, Page: 46 / 123

46
Chapter 3: Maintenance and Component Installation
Intel Optane PMem 200 Series Memory Population Table
Note : PMem 200 Series are supported on 3rd gen Intel Xeon Scalable Platinum, Gold and
selected Silver processors.
Legend (for the table above)
DDR4 Type and Capacity
DDR4
See Validation Matrix (DDR4 DIMMs validated with DCPMM)
Capacity
PMem Any Capacity (Uniformly for all channels for a given configuration)
20-DIMM Motherboard PMem Population within 1 CPU socket
DDR4
+Pmem
Mode
AD Inter-
leave
P1-
DIMMF1
P1-
DIMME1
P1-
DIMMH1
P1-
DIMMG1
P1-
DIMMG2
P1-
DIMMC2
P1-
DIMMC1
P1-
DIMMD1
P1-
DIMMA1
P1-
DIMMB1
4+4
AD
MM
One - x4 DDR4 PMem DDR4 PMem - - PMem DDR4 PMem DDR4
6+1 AD One - x1
DDR4 DDR4 - DDR4 - - DDR4 PMem DDR4 DDR4
DDR4 DDR4
PMem
DDR4 - - DDR4 - DDR4 DDR4
PMem DDR4 DDR4 DDR4 - - DDR4 DDR4 DDR4 -
DDR4 DDR4 DDR4 - - - PMem DDR4 DDR4 DDR4
DDR4 - DDR4 DDR4 - - DDR4 DDR4 PMem DDR4
DDR4 DDR4 DDR4 PMem - - - DDR4 DDR4 DDR4
DDR4 PMem DDR4 DDR4 - - DDR4 DDR4 - DDR4
8+1 AD One - x1 DDR4 DDR4 DDR4 DDR4 -
PMem
DDR4 DDR4 DDR4 DDR4
Validation Matrix (DDR4 DIMMS w/PMem 200 Series)
DIMM Type
Ranks Per DIMM
& Data Width
(Stack)
DIMM Capacity (GB)
DRAM Density
8Gb 16Gb
RDIMM
(up to 3200)
1Rx8 N/A N/A
1Rx4 16GB 32GB
1Rx8 16GB 32GB
1Rx4 32GB 64GB
RDIMM 3DS
(up to 3200)
4Rx4 (2H) N/A 128GB
8Rx4 (4H) NA 256GB
LRDIMM (up to 3200) 4Rx4 64GB 128GB
LRDIMM 3DS
(up to 3200)
4Rx4 (2H) N/A N/A
8Rx4 (4H) 126GB 256GB
•
Mode definitions: AD = App Direct Mode, MM = Memory Mode.
•
For MM, NM/FM ratio is between 1:4 and 1:16. The capacity not used for FM can be used for AD. (NM = Near Memory;
FM = Far Memory).
•
Matrix targets configs for optimized PMem to DRAM cache ratio in MM mode.
•
For each individual population, different PMem rearrangements among channels are permitted so long as the
configuration doesn’t break X12 DP Memory population rules.
•
Ensure the same DDR4 DIMM type and capacity are used for each DDR4 + PMem population.
•
If the system detects an unvalidated configuration, then the system issues a BIOS warning. The CLI functionality is
limited in non-POR configurations, and select commands will not be supported.