Supermicro SUPERSERVER 6018R-TD, User Manual

Page: 12 / 77

Chapter 2: Server Installation
2-5 2-4
S
UPER
S
ERVER 6018R-TD User's Manual
SCALE 0.500
Figure 2-1. Identifying the Sections of the Rack Rails
(right side rail shown)
SCALE 0.500
Rail Extension
(Inner Rail is pre-installed
on the chassis)
Outer Rails
2-4 Rack Mounting Instructions
This section provides information on installing the SC813TS-441CBP chassis into
a rack unit. There are a variety of rack units on the market, which may mean the
assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
Note: This rail will fit a rack between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of two sections: an inner rail that secures directly to the
chassis, and an outer rail that secures directly to the rack itself.
Figure 2-2. Identifying the Sections of the Rack Rails
(right side rail shown)
Inner Rail Extension
The SC813TS-441CBP chassis includes a set of inner rails which are in two
sections: inner rails and inner rail extensions. The inner rails are pre-attached and
do not interfere with normal use of the chassis if you decide not to use a server
rack. Attach the inner rail extension to stabilize the chassis within the rack.
Installing the Inner Rails
1. Place the inner rail extensions on the side of the chassis aligning the hooks
of the chassis with the inner rail extension holes. Make sure the inner rail
extension faces "outward" just like the pre-attached inner rail.
2. Slide the extension toward the front of the chassis.
3. Secure the chassis with 2 screws as illustrated.
4. Repeat steps 1-3 for the other inner rail extension.
1
1
1
2
1
3