Supermicro SUPERSERVER 6014V-T2, User Manual, Page: 74 / 120

7-8
S
UPER
S
ERVER 6014V-T2 User's Manual
S.M.A.R.T. For Hard disk drives
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select Auto to allow the BIOS to auto detect hard
disk drive support. Select Disabled to prevent the AMI BIOS from using the
S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to sup-
port hard drive disk. The options are Disabled, Enabled and Auto .
32Bit Data Transfer
Select Enabled to activate the function of 32-Bit data transfer. Select Disabled
to deactivate the function. The options are Enabled and Disabled .
Hard Disk Write Protect
Select Enabled to enable the function of Hard Disk Write Protect to prevent data
from being written to HDD. The options are Enabled and Disabled .
IDE Detect Time Out
This feature allows the user to set the time-out value for detecting ATA, ATA PI
devices installed in the system. The options are 0 (sec), 5, Mode 1.0, 15, 20, 25,
30 and 35 .
Floppy Confi guration
This option allows the user to confi gure the settings for the Floppy Drives installed
in the system.
Floppy A
Move the cursor to these fi elds via up and down <arrow> keys to select the fl oppy
type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3½", 1.44
MB 3½” and 2.88 MB 3½".
OnBoard Floppy Controller
Select Enabled to enable the Onboard Floppy Controller. The options are Disabled
and Enabled .