Supermicro SUPERSERVER 6014V-T2, User Manual, Page: 12 / 120

1-2
S
UPER
S
ERVER 6014V-T2 User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6014V-T2 lies the X6DVL-EG2, a dual processor
serverboard based upon Intel's E7320 chipset. Below are the main features of the
X6DVL-EG2.
Processor
The X6DVL-EG2 has two 604-pin FC-mPGA4 sockets to support dual Intel 64-bit
Xeon processors. The following types of processors are supported (two installed
processors must be of the same type): Intel 64-bit Xeon "Nocona" processors
with a 1MB L2 Integrated Advanced Transfer Cache, Intel 64-bit Xeon "Irwindale"
processors with a 2MB L2 Integrated Advanced Transfer Cache, and Intel
®
"LV"
(Low Voltage) processors. Please refer to the support section of our web site for a
complete listing of supported processors (http://www.supermicro.com/support/).
Memory
The X6DVL-EG2 has four (4) 240-pin DIMM sockets that can support up to 8 GB
of ECC registered DDR2-400 SDRAM. The X6DVL-EG2's dual-channel memory
bus requires modules to be populated in pairs. All memory modules must be the
same size and speed.
Serial ATA
A Serial ATA controller is incorporated into the 6300ESB (South Bridge) portion of
the E7320 chipset to provide a two-port Serial ATA subsystem, which is RAID 0
and RAID 1 supported. The Serial ATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The X6DVL-EG2 has two PCI-Express x4 slots, one 64-bit 66 MHz PCI slot and
three 32-bit PCI slots. One riser card is included with the system to support a single
add-on card in the 64-bit 66 MHz PCI slot (see Chapter 5 for details).
C-