Supermicro SUPERSERVER 6014V-T2, User Manual, Page: 3 / 120

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 6014V-T2. Instal-
lation and maintainance should be performed by experienced technicians only.
The SuperServer 6014V-T2 is a high-end dual processor 1U rackmount server
based on the SC811T-420 server chassis and the Super X6DVL-EG2 serverboard.
The X6DVL-EG2 supports up to two of the same type processors that follow: Intel
®
64-bit Xeon TM "Nocona" processors with a 1MB L2 Integrated Advanced Transfer
Cache, Intel
®
64-bit Xeon TM "Irwindale" processors with a 2MB L2 Integrated Ad-
vanced Transfer Cache, and Intel
®
"LV" (Low Voltage) processors. Please refer
to our web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the serv-
er system and describes the main features of the Super X6DVL-EG2 serverboard
and the SC811T-420 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6014V-T2 into
a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without the processor and memory components, this chap-
ter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface