Supermicro SUPERSERVER 6014V-T2, User Manual, Page: 55 / 120

Chapter 5: Advanced Serverboard Setup
5-19
SATA LED Header
The Serial ATA LED header is desig-
nated JSLED. Connect an LED cable
here to display SATA drive activity.
See the table on the right for pin
defi nitions.
SATA LED Pin Defi nitions
(JSLED)
Pin Number Defi nition
1 SATA HD0 Activity
2 SATA HD1 Activity
3 N/C
4 N/C
5 N/C
Onboard LED Indicators
There are several LED indicators on
the X6DVL-EG2 serverboard desig-
nated DS1-DS2, DS4-DS5 and DS7-
DS8. DS7 and DS8 are POST Code
LEDs.
Note: Refer to Appendix A for the
meanings of the POST Codes dis-
played by DS7 and DS8.
Onboard LED Indicators
(DS1, DS2, DS4, DS5, DS7, DS8)
DS Number Defi nition
DS1 CPU PWR good or PW2 must be
connected
DS2 CPU2 VRM overheat
DS4 CPU1 VRM overheat
DS5 Power LED
DS7-8 POST LEDs
System LED
DS9 is the system LED, which in-
dicates the status of the system as
described in the table on the right.
System LED Indicator
(DS9)
Color System Status
Green System: On and OK
Amber System: Off, power cable con-
nected
Red Power or CPU failure, CPU
overheat