Supermicro SUPERSERVER 6014H-T, User Manual, Page: 80 / 124

7-14
S
UPERSERVER 6014H-T User’s Manual
KBC Clock Input
This setting allows you to select clock frequency for KBC. The options are
6MHz, 8MHz, 12MHz and 16MHz.
On-board COM 1
This setting allows you to assign control of serial port A. The options are Enabled
(user defi ned), Disabled and Auto (BIOS controlled).
Base I/O Address
Select the base I/O address for serial port A. The options are 3F8 , 2F8,
3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port A. The options are IRQ3
and
IRQ4 .
On-board COM 2
This setting allows you to assign control of serial port B. The options are Enabled
(user defi ned), Disabled and Auto (BIOS controlled).
Mode
Specify the type of device that will be connected to serial port B. The options
are Normal , IR (for an infrared device) and ASK-IR.
Base I/O Address
Select the base I/O address for serial port B. The options are 3F8, 2F8 ,
3E8 and 2E8.
Interrupt
Select the IRQ (interrupt request) for serial port B. The options are IRQ3
and IRQ4.
Floppy Disk Controller
This setting allows you to assign control of the fl oppy disk controller. The options
are Enabled (user defi ned), Disabled and Auto (BIOS controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are Primary
and Secondary.