Supermicro SUPERSERVER 6014H-T, User Manual, Page: 14 / 124

S
UPER
S
ERVER 6014H-T Manual
1-4
1-3 Server Chassis Features
The SC813T-500 is one of Supermicro's third-generation 1U chassis and features
four hot-swap Serial ATA drive bays, a slim CD-ROM drive, a slim 3.5" fl oppy drive
and a revolutionary cooling design that can keep today's most powerful processors
running well below their temperature thresholds. The following is a general outline
of the main features of the SC813T-500 chassis.
System Power
The SC813T-500 chassis includes a single 500W cold-swap power supply.
Serial ATA Subsystem
For the 6014H-T, the SC813T-500 chassis was designed to support four Serial
ATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Control Panel
The SC813T-500 control panel provides important system monitoring and control
information. LEDs indicate power on, network activity, hard disk drive activity
and system overheat conditions. Also present are a main power button and a
system reset button.
I/O Backplane
The SC813T-500 is a 1U rackmount chassis. Its I/O backplane provides one full-
height full-length and one half-height half-length slots for PCI add-on cards, one
COM port (the other is internal), one VGA port, two USB ports, PS/2 mouse and
keyboard ports and two Ethernet (LAN) ports. (See Figure 1-2.)
Cooling System
The SC813T-500 chassis' revolutionary cooling design has been optimized to pro-
vide suffi cient cooling for dual Xeon confi gurations. The SC813T-500 includes two
heavy duty 10-cm blower fans located in the middle of the chassis. In the event of
a fan failure, the ambient air temperature inside the chassis will rise and activate
an overheat LED (fan speed is controlled by the system temperature).