Supermicro SUPERSERVER 6014H-T, User Manual, Page: 62 / 124

6-6
S
UPER
S
ERVER 6014H-T Manual
Serial ATA Drive Installation
1. Mounting a Serial ATA drive in a drive carrier
The Serial ATA drives are mounted in drive carriers to simplify their installation
and removal from the chassis. These carriers also help promote proper airfl ow
for the Serial ATA drive bays. For this reason, even empty carriers without Serial
ATA drives installed must remain in the chassis. To add a new Serial ATA drive,
install a drive into the carrier with the printed circuit board side facing down so
that the mounting holes align with those in the carrier. Secure the drive to the
carrier with six screws, as shown in Figure 6-4.
Figure 6-4. Mounting an SATA Drive in a Carrier
Important: Regardless of how many Serial ATA hard drives are
installed, all drive carriers must remain in the drive bays to main-
tain proper airfl ow.
Use caution when working around the Serial ATA backplane. Do
not touch the backplane with any metal objects and make sure no
ribbon cables touch the backplane or obstruct the holes, which
aid in proper airfl ow.