Supermicro SUPERSERVER 6014H-T, User Manual, Page: 77 / 124

Chapter 7: BIOS
7-11
PCI-X 133MHz Slot #1/Slot#2, PCI-Expx8 Slot#1/ Slot#2
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The
options are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled .
Latency Timer
This setting allows you to set the clock rate for Bus Master.A high-prioity,
high-throughout device may benefi t from a greater Clock rate. The options
are Default , 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For
Unix, Novell and other Operating Systems, please select the option:"other".
If a drive fails after the installation of a new software , you might want to
change this settiing and try again. Different OS requires different Bus Master
clock rate .
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options
are DOS or Other (for Unix, Novellle NetWare and other operating systems).
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Force Compliance Mode Entry
This feature allows you to enable the PCI-Express Compliance 1.0 Mode. The
options are: Disabled or Enabled.