Supermicro SUPERSERVER 6014H-T, User Manual, Page: 12 / 124

S
UPER
S
ERVER 6014H-T Manual
1-2
1-2 Serverboard Features
At the heart of the SuperServer 6014H-T lies the X6DHR-TG a dual Xeon pro-
cessor serverboard designed to provide maximum performance. Below are the
main features of the X6DHR-TG. See Figure 1-1 for a system block diagram of
the chipset.
Processors
The X6DHR-TG supports single or dual 604-pin Intel Xeon processors of up to
3.60 GHz at an 800 MHz FSB. Please refer to our web site for a complete listing
of supported processors (http://www.supermicro.com).
Memory
The X6DHR-TG has eight 184-pin DIMM slots that can support up to 32 GB of
DDR266 or up to 16 GB of DDR333 SDRAM. (This serverboard has been de-
signed to support 2GB DIMM modules for each memory slot, but it has only been
validated with 1GB memory modules.) The dual-channel memory bus requires
memory modules to be installed two at a time.
Serial ATA
A Marvell SATA controller is integrated into the X6DHR-TG to provide a four-port
Serial ATA subsystem, which is RAID 0, 1 and 10 supported. The ICH5R South
Bridge of the chipset also includes a Serial ATA controller that supports two
SATA ports (RAID 0 and 1 supported). The Serial ATA drives are hot-swappable
units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
Two riser cards have been included with the server to support server PCI expan-
sion. The CSE-RR1U-X riser fi ts into the 133 MHz PCI-X slot on the X6DHR-TG
to support a standard size (full-height, full-length) PCI-X add-on card (any speed).
The CSE-RR1U-XLP fi ts into the 100 MHz PCI-X slot to support one low profi le
(half-height, half-length) PCI-X add-on card (of either 100 or 66 MHz).