Supermicro SuperServer 6013P-T, User Manual, Page: 47 / 131

Chapter 5: Advanced Serverboard Setup
5-11
X5DPR-TG2+ Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear See Jumper Section
JD1 Speaker Enable (Pins 6-7) Closed (Enabled)
JD4 GLAN Enable/Disable Pins 1-2 (Enabled)
JP4 VGA Enable/Disable Pins 1-2 (Enabled)
JP9 Power Fail Alarm En/Disable Open (Disabled)
JP37 Watchdog Enable/Disable Closed (Enabled)
JP38 Front Side Bus Speed Pins 1-2 (Auto)
JPS1,JPS2 SATA1/2 Enable/Disable Pins 1-2 (Enabled)
Connector Description
ATX POWER (Primary) ATX 20-pin Power Connector
COM1/COM2 COM1/COM2 Serial Port Connectors
CPU1/CPU2 CPU 1 and CPU2 Sockets
D1-D4 CPU LEDs
DIMM#1A-DIMM#3B Memory (SDRAM) Slots
DS1-DS4 Serial ATA LEDs
GLAN1/2 Gigabit Ethernet Ports
J2/J3 IDE #1/#2 Hard Disk Drive Connectors
J15 Secondary (12V) ATX Power Connector
J17/J18 PCI-X #1/PCI-X #2 slots
J22 IPMI Header
J28 Keyboard Port
J29 Mouse Port
JD1 WD/PWR LED/SPKR/JPS1,JPS2,/JL1
JD2 FPUSB 0/1
JF2 Front Control Panel Connector
JL1 Chassis Intrusion
JP7 Floppy Disk Drive Connector
JP8 Third Power Supply Fail Header
JP24 SMB (System Management Bus) Header
JP35 Keylock Header
JP36 Alarm Reset Switch
SATA0/1/2/3 Serial ATA Connectors
USB0/1/2 Universal Serial Bus Ports
VGA VGA (Monitor) Port
WOL Wake-on-LAN Header
WOR Wake-on-Ring Header