Supermicro SuperServer 6013P-T, User Manual, Page: 119 / 131

Appendix C: Software Installation
C-15
h. After Windows OS Installation is completed, the system will automati-
cally reboot.
i. Insert Supermicro's CD that came with the package into the CD Drive
during the system reboot, and the following screen will appear:
j. When the following screen appears, you are ready to install other
software programs and drivers.
C-2 Installing the Operating System
New Windows Operating System Installation
a. Insert Microsoft Windows OS Setup CD in the CD Driver, and the
system will start to boot up from CD.
b. Press the <F6> key when the message-"Press F6 if you need to install
a third party SCSI or RAID driver" displays.
c. When the Windows OS Setup screen appears, press "S" to specify
additional device(s).
d. Insert the driver diskette-"Silicon Image Sil 3112 SATARAID Controller
Driver" into Drive A: and press the <Enter> key.
e. Choose Sil 3112 SATA RAID Controller from the list indicated in the
Windows OS Setup Screen, and press the <Enter> key.
f. Press the <Enter> key to continue the installation process. (If you need
to specify any additional devices to be installed, do it at this time.) Once
all devices are specified, press the <Enter> key to continue with the
installation.
g. From the Windows OS Setup screen, press the <Enter> key. The OS
Setup will automatically load all device files, and, then, continue the
Windows OS installation.