Supermicro SUPERSERVER 1028R-WC1R, User Manual

Page: 59 / 128

Chapter 5: Advanced Serverboard Setup
5-9
Caution: You can only install the CPU to the socket in one direction. Make sure
that the CPU is properly inserted into the socket before closing the load plate. If it
doesn't close properly, do not force it as it may damage your CPU. Instead, open
the load plate again and double-check that the CPU is aligned properly.
7. With the CPU in the socket,
inspect the four corners of the
CPU to make sure that they are
fl ush with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the
load levers down until the lever
locks.
OPEN 1st OPEN
1st
Lever Lock
Push down
and lock the
lever labeled
'Open 1st'.
OPEN 1st OPEN
1st
Push down and lock the
level labeled 'Close 1st'.
Gently close
the load plate.
9. Repeat steps to install to the
remaining CPU socket.