2-4
SUPERSERVER
1028R-WC1R(T) USER'S MANUAL
2-5 Rack Mounting Instructions
This section provides information on installing the SC116 chassis into a rack unit with
the rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE:
This rail will fi t a rack between 26" and 33.5" deep.
Warning:
Do not pick up the server with the front handles. They are
designed to pull the system from a rack only.
Stability Hazard:
The rack stabilizing mechanism must be in place, or the
rack must be bolted to the fl oor before you slide the unit out for servicing. Failure
to stabilize the rack can cause the rack to tip over.
Warning:
Slide rail mounted equipment is not to be used as a shelf or a
work space.
Figure 2-1. Identifying the Sections of the Rack Rails
Inner Rails
(Inner rails are pre-installed
on the chassis)
Inner Rail
Extensions
Summary of Contents for SUPERSERVER 1028R-WC1R
