Supermicro SUPERSERVER 1028R-WC1R, User Manual

Page: 119 / 128

Chapter 7: BIOS
7-29
Password Check
This item allows you to decide when the system should check for a password after
it has been entered. Select Setup for the system to prompt for a password before
the user enters the BIOS Setup utility. Select Always for the system to prompt for
a password upon each system boot and before the user enters the Setup utility.
The options are Setup and Always.
Administrator Password
Use this feature to set the Administrator Password which is required to enter the
BIOS setup utility. The length of the password should be from 3 characters to 20
characters long.
7-8 Save & Exit
This submenu allows the user to confi gure the Save and Exit settings for the
system.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes
to the system confi guration, and reboot the computer. Select Discard Changes
and Exit, and press <Enter>. When the dialog box appears, asking you if you want
to exit the BIOS setup without saving, select Yes to quit BIOS without saving the
changes, or select No to quit the BIOS and save changes.