Supermicro SuperServer 1019C-FHTN8 User Manual Download Page 80

Page: 80 / 121

SuperServer 1019C-FHTN8 User's Manual

Above 4GB MMIO BIOS Assignment

Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Enable and

Disabled

VGA Priority

Use this feature to select VGA priority when multiple VGA devices are detected. Select

Onboard to give priority to your onboard video device. Select Offboard to give priority to your

graphics card. The options are

Onboard

and Offboard.

Onboard Video Option ROM

Use this feature to select the onboard video firmware type to be loaded. The options are

Legacy

and EFI.

NVMe Firmware Source

Use this feature to select the NVMe firmware to support booting. The options are

Vendor

Defined Firmware

and AMI Native Support. The default option, Vendor Defined Firmware,

is pre-installed on the drive and may resolve errata or enable innovative functions for the

drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.

PCIe/PCI/PnP Configuration

CPU SLOT6 PCI-E 3.0 X16 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled,

Legacy

, and EFI.

M.2-P_1 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled,

Legacy

, and EFI.

M.2-H_2 OPROM

Use this feature to select which firmware type to be loaded for the add-on card in this slot.

The options are Disabled,

Legacy

, and EFI.

Onboard LAN Option ROM Type

Use this feature to select which firmware type to be loaded for onboard LAN ports. The

options are

Legacy

and EFI.

*If the feature above is set to Legacy, the following LAN ports will be listed and become

available for configuration:

Onboard LAN1 ~ LAN2 (X11SCM-LN8F) / Onboard LAN1 ~ LAN4 (X11SCM-LN8F) /

Onboard LAN1 ~ LAN8 (X11SCM-LN8F) Option ROM Type

Use this feature to select which firmware function to be loaded for the specified onboard LAN

port at system boot. The options are

Disabled

PXE, and iSCSI*.

*iSCSI is only supported on Onboard LAN1. The default setting for Onboard LAN1 is
PXE.

Summary of Contents for SuperServer 1019C-FHTN8


























































































































Search results

Summary of Contents for SuperServer 1019C-FHTN8

Reviews:

Related manuals for SuperServer 1019C-FHTN8

Brands by name

Popular brands

Supermicro SuperServer 1019C-FHTN8, User Manual

Search results

Summary of Contents for SuperServer 1019C-FHTN8

Reviews:

Related manuals for SuperServer 1019C-FHTN8

Brands by name

Popular brands