56
SuperServer 1019C-FHTN8 User's Manual
4.3 Front I/O Ports
The following input/output ports are provided by the motherboard.
Figure 4-2. Front I/O Ports
IPMI LAN Port
An IPMI-dedicated GbE LAN port is on the I/O panel. IPMI LAN is supported by the Aspeed
AST2500 BMC (Baseboard Management Controller). This port accepts a RJ45 type cable.
Refer to the LED Indicator Section for IPMI LAN LED information.
Universal Serial Bus (USB) Ports
There are two USB 3.1 Gen 1 ports (5/6) and two USB 2.0 ports (3/4).
Unit Identifier Switch/UID LED Indicator
A Unit Identifier (UID) Switch (UID-SW) and a rear LED Indicator (UID-LED) are located on
the I/O panel. When the user presses the UID switch, the UID LED indicator illuminates. Press
the UID switch again to turn off the UID LED. The UID indicator provides easy identification
of a system unit that might be in need of service.
Note:
UID can also be triggered via IPMI on the motherboard. For more information on IPMI,
refer to the IPMI User's Guide posted on our website:
http://www.supermicro.com
.
1
9
8
7
6
5
4
3
2
10
11
13
12
14
15
#
Description
#
Description
#
Description
1
VGA Port
6
USB4 (USB 3.1 Gen 1)
11
LAN5
2
Dedicated IPMI LAN
7
LAN1
12
LAN6
3
USB1
8
LAN2
13
LAN7
4
USB0
9
LAN3
14
LAN8
5
USB5 (USB 3.1 Gen 1)
10
LAN4
15
UID Switch and UID LED
