50
SuperServer 1019C-FHTN8 User's Manual
Standby Power
The Standby Power header is located at JSTBY1 on the motherboard. You must have a card
with a Standby Power connector and a cable to use this feature.
Standby Power
Pin Definitions
Pin#
Definition
1
+5V Standby
2
Ground
3
No Connection
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intrusion when the chassis is opened.
Chassis Intrusion
Pin Definitions
Pin#
Definition
1
Intrusion Input
2
GND
COM Header
There is one COM header (COM1) on the motherboard that can provide serial communication
support.
COM Header
Pin Definitions
Pin#
Definition
Pin#
Definition
1
DCD
6
DSR
2
RXD
7
RTS
3
TXD
8
CTS
4
DTR
9
RI
5
GND
10
N/A
LAN Activity LED Connectors
There are two LAN Activity LED connectors on the motherboard. JLD1 enables the LED for
LAN3 and LAN4, while JLD2 enables LAN5 ~ LAN8. Attach Network Interface Controller (NIC)
LED cables here to display network activity.
LAN Activity LED
Connector (JLD1)
Pin Definitions
Pins
Definition
1
3.3V Stby
2
LAN3 Active LED
3
3.3V Stby
4
LAN4 Active LED
LAN Activity LED Connector (JLD2)
Pin Definitions
Pin#
Definition
Pin#
Definition
1
3.3V Stby 2
LAN5 Active LED
3
3.3V Stby 4
LAN6 Active LED
5
3.3V Stby 6
LAN7 Active LED
7
3.3V Stby 8
LAN8 Active LED
