Supermicro SuperServer 1017R-WR, User Manual

Page: 66 / 125

5-20
S
UPER
S
ERVER 1017R-WR User's Manual
IPMB I
2
C
A System Management Bus header
for the IPMI slot is located at IPMB.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB I
2
C
Pin Definitions (IPMB)
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Serial_Link-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
T-SGPIO 1/2 & 3-SGPIO 1/2
Headers
Two T-SGPIO (Serial-Link General
Purpose Input/Output) headers are
located next to the I-SATA ports on
the motherboard. Additionally, two
3-SGPIO ports are also located next
to USB 8/9. These headers are used
to communicate with the enclosure
management chip in the system. See
the table on the right for pin defini -
tions.
Trusted Platform Module Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
TPM Header
This header is used to connect to
a Trusted Platform Module (TPM),
which is available from third-party
vendors. A TPM is a security device
that supports encryption and authen-
tication in hard drives. It enables the
motherboard to deny access if the
TPM associated with the hard drive
is not installed in the system. See the
table on the right for pin definitions.
Note: NC indicates no connection.