Supermicro SuperServer 1017R-WR, User Manual

Page: 62 / 125

5-16
S
UPER
S
ERVER 1017R-WR User's Manual
NIC1 LED
The NIC1 (Network Interface Control-
ler) LED connection is located on pins
11 and 12 of JF1. Attach the NIC1
LED cable to display network activity.
Refer to the table on the right for pin
definitions.
NIC2 LED
The NIC2 (Network Interface Control-
ler) LED connection is located on
pins 9 and 10 of JF1. Attach the NIC2
LED cable to display network activity.
Refer to the table on the right for pin
definitions.
NIC1 LED
Pin Definitions (JF1)
Pin# Definition
11 Vcc
12 Ground
NIC2 LED
Pin Definitions (JF1)
Pin# Definition
9 Vcc
10 Ground
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
hard drive LED cable to display SATA/
IDE disk activity. Refer to the table on
the right for pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 Vcc
14 HD Active
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin defini -
tions.
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5 Vcc
6 Ground
OH/Fan Fail Indicator
Status
State Definition
Off Normal
On Overheat
Flash-
ing
Fan Fail
Overheat (OH)/Fan Fail/UID LED
Connect an LED cable to the Front
UID and OH/Fan Fail connections on
pins 7 and 8 of JF1 to display UID
(Unit ID) signals or to provide ad-
vanced warnings for chassis overheat/
fan failure. Refer to the table on the
right for pin defi nitions.