Supermicro SuperServer 1017R-WR, User Manual

Page: 109 / 125

7-26
S
UPER
S
ERVER 1017R-WR User's Manual
SB (South Bridge) Chipset Configuration
PCH Compatibility RID
Select Enabled to enable Compatibly Revision ID (CRID) support which will modify
the chipset's PCI identifiers for compatibility reasons. The options are Disabled
and Enabled.
Restore AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off,
and
Last State .
SLP_S4 Assertion Stretch Enable
Select Enabled to support the assertion stretch width of the SLP _S4# signal to
maximize power safe cycles for DRAMs. The options are Disabled and
Enabled .
SLP_S4 Assertion Width
This item sets the minimum assertion width of the SLP _S4# signal to ensure that
DRAMs' power cycles are safe. The options are 1-2 seconds, 2-3 seconds, 3-4
seconds, and
4-5 seconds .
Deep Sx
Use this item to configure Deep S4/S5 (Sx) settings for power support. For mobile
devices, Deep Sx is supported in DC only. For desktop platforms, Sx is supported
in AC only. The options are
Disabled , Enabled in S5 (Battery), Enabled in S5,
Enabled in S4 & S5 (Battery), and Enabled in S4 & S5.
Disable SCU Devices
Select Enabled to enable support for Patsburg SCU (System Configuration Utility)
devices. The options are Disabled and Enabled.
Onboard SAS Oprom
Select Enabled to support Onboard SAS Option ROM which will allow the system to
boot-up through onboard SAS connections. The options are
Disabled
and Enabled.
Onboard SATA RAID Oprom
Select Enabled to support Onboard SATA RAID Option ROM which will allow the
system to bootup through onboard SATA RAID devices via network connections.
The options are
Enabled and Disabled.