Supermicro SC721TQ-250B, User Manual

Page: 43 / 68

5-7
Chapter 5: Chassis Setup and Maintenance
5-6 Installing the Side Mounted Fixed Hard Drive
Figure 5-6. Installing the Side Mounted Fixed Hard Drive
Installing the Side Mounted Fixed Hard Drive
1. Power down the system and plug the power cord into the rear of the power
supply as described in Section 5-2 and remove the chassis cover as de-
scribed in Section 5-3.
2. Place the 2.5" hard drive into the hard drive bracket and secure the hard
drive to the bracket with the four screws provided.
3. Place the hard drive and bracket into the side mounting position of the chas-
sis by inserting the pin on the bracket into the mounting hole on the chassis
as illustrated above.
4. Replace the chassis cover, plug the power cord into the rear of the power
supply and power up the system.