Supermicro SC721TQ-250B, User Manual

Page: 39 / 68

5-3
Chapter 5: Chassis Setup and Maintenance
1
4
5-4 Removing and Installing Hard Drives
The SC721 chassis supports four 3.5" hot-swappable hard drives in hard drive
carriers. These hard drives can be removed from the chassis without powering
down the system.
Removing 3.5" Hot-Swap Hard Drives
1. Unlock the front bezel and swing it open.
2. Press the release tab on the hard drive carrier, this will extend the hard drive
carrier handle.
3. Use the hard drive carrier handle to pull the hard drive out of the chassis.
Figure 5-2. Removing the Hard Drive Carrier from the Hard Drive Chassis