3-15
Chapter 3: Setup and Installation
Memory Population Guidelines
•
All DIMMs must be DDR4.
•
Balance memory. Using unbalanced memory topology, such as populating two
DIMMs in one channel while populating one DIMM in another channel, reduces
performance. It is not recommended for Supermicro systems.
•
In dual-CPU configurations, memory must be installed in the slots associated with
the installed CPUs.
•
Guidelines Regarding Mixing DIMMs
•
Populating slots with a pair of DIMM modules of the same type and size results in
interleaved memory, which improves memory performance.
•
Use memory modules of the same type and speed, as mixing is not allowed.
•
x4 and x8 DIMMs can be mixed in the same channel.
•
Mixing of LRDIMMs and RDIMMs is not allowed in the same channel, across
different channels, and across different sockets.
•
Mixing of non-3DS and 3DS LRDIMM is not allowed in the same channel, across
different channels, and across different sockets.
•
DIMM Construction
•
RDIMM (
non-3DS
) Raw Cards: A/B (2Rx4), C (1Rx4), D (1Rx8), E (2Rx8)
•
3DS RDIMM Raw Cards: A/B (4Rx4)
•
LRDIMM (
non-3DS
) Raw Cards: D/E (4Rx4)
•
3DS LRDIMM Raw Cards: A/B (8Rx4)
Summary of Contents for SBI-6419P-T3N
