Supermicro SBI-6419P-T3N, User Manual

Page: 9 / 94

1-3
Chapter 1: Introduction
Please refer to the Supermicro website for a list of supported memory
(
www.supermicro.com/products/superblade ). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Details on installation of memory modules into the SBI-6419P-T3N SuperBlade module
are found in
Chapter 3: "Setup and Installation" on page 3-1 .
Storage
The SBI-6419P-T3N SuperBlade module has three NVMe/SATA3 drives in
front-mounted easily removable hot-swap carriers.
See Chapter 3: "Setup and Installation" on page 3-1 for storage installation details.
RAID
Each SBI-6419P-T3N blade module supports several hard drives, which may create a
RAID system for the blade module. For RAID setup see
http://www.supermicro.com/
support/manuals/ under RAID Installation Guides for more details.
Enclosure Requirements
The SBI-6419P-T3N blade module requires one of the following enclosures to run in:
•
SBE-614E-822
• SBE-614E-622
•
SBE-614E-422
•
SBE-614EB-422
The SBI-6419P-T3N blade module also requires a power supply in the enclosure to run
the blade module. Available SuperBlade power supplies can be found on the
Supermicro website at
42https://www.supermicro.com/products/SuperBlade/
powersupply/ .
Density
A maximum of 14 SBI-6419P-T3N blade modules may be installed into a single blade
enclosure. Each blade enclosure is a 6U form factor, so a standard 42U rack may
accommodate up to seven enclosures with 98 blade modules, or the equivalent of 98 1U
servers. With the inclusion of seven CMM modules and fourteen 1G/25G Ethernet
switches, this would occupy up to 119U space in a conventional 1U server configuration.