Chapter 4: BIOS
4-11
Hyper Transport Confi guration
CPU0: CPU1 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are
Auto
, 200
MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz.
CPU0: CPU1 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are
Auto
, 2
bit, 4 bit, 8 bit and 16 bit.
HT1000 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are
Auto
, 200
MHz, 400 MHz, 600 MHz and 800 MHz.
HT1000 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are
Auto
, 2
bit, 4 bit and 8 bit.
MPS Confi guration
MPS Revision
This setting allows the user to select the MPS revision level.
The options are
1.1 and
1.4.
Remote Access Confi guration
Remote Access
Use this setting to Enable or
Disable
remote access. If Enabled is selected,
you can select a Remote Access type.
Summary of Contents for H8DSL-HTi
