Supermicro A+ AS -2114GT-DNR User Manual Download

Page: 100 / 126

100

A+ Server AS -2114GT-DNR User's Manual



Delete Boot Option

Use this feature to remove a pre-defined boot device from which the system will boot during
startup. The settings are [any pre-defined boot device].



UEFI Hard Disk Drive BBS Priorities

This feature allows the user to specify which UEFI devices are boot devices.

•

Boot Option #1



UEFI Network Drive BBS Priorities

This feature specifies the boot device priority sequence from the available UEFI network

drives.

•

Boot Option #1



UEFI Application Boot Priorities

This feature allows the user to specify which UEFI devices are boot devices.

•

Boot Option #1

Summary of Contents for A+ AS -2114GT-DNR































































































































Search results

Summary of Contents for A+ AS -2114GT-DNR

Reviews:

Related manuals for A+ AS -2114GT-DNR

Brands by name

Popular brands

Supermicro A+ AS -2114GT-DNR, User Manual

Search results

Summary of Contents for A+ AS -2114GT-DNR

Reviews:

Related manuals for A+ AS -2114GT-DNR

Brands by name

Popular brands