Supermicro A+ AS-1114S-WTRT User Manual Download Page 131

Page: 131 / 131

Appendix E: IPMI Crash Dump

131

Downloading the Crash Dump File

In the IPMI interface, click the

Miscellaneous

tab, then the

Trouble Shooting

option.

Click the

Dump

button and wait five minutes for the file to be created. (No confirm ation

message will appear.)

Click the

Download

button and a Save As dialog appears.

Save the zipped dump file, noting the name and location.

Note:

The

System auto reset

check box dictates behavior after an IERR. If checked, the

system will restart automatically, and the dump file will be erased. If not, the system remains
in a failed state. Do not check this box until after the dump file has been sent to Support.

Figure E-2. IPMI Crash Dump Download

Summary of Contents for A+ AS-1114S-WTRT




































































































































Search results

Summary of Contents for A+ AS-1114S-WTRT

Reviews:

Related manuals for A+ AS-1114S-WTRT

Brands by name

Popular brands

Supermicro A+ AS-1114S-WTRT, User Manual

Search results

Summary of Contents for A+ AS-1114S-WTRT

Reviews:

Related manuals for A+ AS-1114S-WTRT

Brands by name

Popular brands