Supermicro 8042-6, User Manual

Page: 90 / 114

7-16
S
UPER
S
ERVER 8042-8/8042-6 Manual
Plug & Play OS
This option specifies how Plug and Play devices will be configured. The
settins are Yes and No . No lets BIOS configure all devices in the system.
Yes lets the operating system (if supported) configure PnP devices not
required for bootup.
Reset Configuration Data
Choosing the Yes setting will cause the PnP configuration data in the BIOS
to be cleared on the next boot up. Choosing the No setting does not force
PnP data to be cleared on the next boot.
PCI Latency Timer
This option specifies the latency timing of the PCI clocks for all PCI devices.
Settings include 32, 64 , 96, 128, 160, 192, 224 and 248 PCI clocks.
7-6 PCI PnP Setup
Choose PCI/PnP from the AMIBIOS Setup main menu. All PCI/PnP options are
described in this section. The PCI/PnP Setup screen is shown below.
BIOS SETUP UTILITY
Main Advanced Chipset PCIPnP Power Boot Security Exit
Plug & Play O/S
Reset Config Data
PCI Latency Timer
Allocate IRQ to VGA
Palette Snooping
PCI IDE BusMaster
USB Function
Legacy USB Support
[No]
[No]
[64]
[Yes]
[Disabled]
[Disabled]
[Enabled]
[Auto]
↔
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.03 (C)Copyright 1985-2002, American Megatrends, Inc.