Supermicro 8025C-3R, User Manual

Page: 82 / 116

7-18
S
UPER
S
ERVER 8025C-3R User's Manual
X
SMBIOS Confi guration
SMBIOS SMI Support
Select Enabled to enable the function of SMBIOS SMI Wrapper support for PnP
Func 50h-54h. The options are Enabled and Disabled.
X Remote Access Confi guration
You can use this screen to select options for the Remote Access Confi guration.
Use the up and down arrow keys to select an item. Use the <+> and <-> keys to
change the value of the selected option.
Remote Access
This feature allows the user to enable the function of Remote Access. The options
are Enabled and Disabled .
If the item "Remote Access" is set to Enabled, the following items will display:
Serial Port Number
This feature allows the user to select the serial port for Console Redirection.
The options are COM1 and COM2.
Base Address, IRQ
This feature allows the user to set the Base Address and IRQ settings for
COM1 or COM2. The default setting for COM1 is 3F8h, 4 . The default setting
for COM2 is 2F8h, 8 .
Serial Port Mode
This feature allows the user to set the serial port mode for Console Redirection.
The options are 115200 8, N, 1 ; 57600 8, N, 1; 38400 8, N, 1; 19200 8, N, 1;
and 9600 8, N, 1.
Flow Control
This feature allows the user to set the fl ow control for Console Redirection.
The options are None, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power_On_Self_Test
(POST). Select Always to keep Console Redirection active all the time after
POST. ( Note : This setting may not be supported by some operating systems.)
Select Boot Loader to keep Console Redirection active during POST and Boot
Loader. The options are Disabled , Boot Loader, and Always.