- 10 -
RDO1BP B
INSTALLATION INSTRUCTIONS
4.
Engaging And Disengaging The Drive Unit
4.1
To disengage the Drive Unit from the garage door pull down on the Red Release Chord. (Fig.11)
4.2
To engage the Drive Unit to the garage door pull down once more on the Red Release Chord.
4.3
Important Note: Always disengage the Drive Unit with the garage door in the fully closed position.
4.4
Important Note:
If attempting to disengage the Drive Unit from any position other than with the garage
door fully closed ensure that there are no persons and/or property near or directly under the path of the
garage door.
Release Chord
Fig 11
Fig 12
5.
Fitting of Weight Bar
5.1
Fit the weight bar to the top edge of the garage door bottom rail as depicted in Fig.12
6.
Fixing Of Curtain To Drum Wheel
6.1
The garage door curtain must be secured to the drum wheel with suitable fasteners such as self drilling screws or
rivets.
6.2
With the garage door in the fully closed position, mark the curtain at points “A” and “B” as depicted in Fig.13
6.3
Once marked, open the door slightly so as to have access to the marked positions. Secure the curtain to the drum
wheel ensuring that the fixing points are at least 90 degrees apart.
Fig 13
