ENGLISH
FRANÇAIS
8
Always connect tool to air supply before loading
fasteners
Do not load fasteners with trigger or safety
pressed.
Always wear approved safety glasses, and hear-
ing protection when preparing or operating the
tool.
Never use a tool that leaks air or needs repair.
2. Depress cover-plate latch (
L, fig.4
).
3. Open cover plate (
K, fig.5
)
4. Open the lower magazine (
J, fig.2
).
5. Place a coil of nails in the lower magazine.
6. Rotate magzine height adjustment knob (
G, fig.6
)
to adjust the lower magazine according to the
nails’ length. The highest position is used for 50
mm (2”) nails while the lowest position is used
for 90 mm (3-9/16”) nails. For all nails between
minimum and maximum, adjust lower magzine
accordingly.
7. Close lower magazine.
OPERATING PROCEDURES
