ENGLISH
FRANÇAIS
6
Figure 2 names the major compo-
nents of the FNC1590:
A. Contact tip
B. Depth adjustment knob
C. 360 degree re-directable
exhaust port
D. Trigger mode selector
E. Trigger
F. Male quick-connect fitting
G. Magazine height adjustment
knob
H. Magazine height indicator
I. Magazine height scale
J. Lower magazine
K. Feed cover plate
L. Cover plate latch
OPERATING PROCEDURES
SET UP
Your Superior FNC1590 Framing Coil Nailer is
fully assembled when you receive it. See the
recommended air system setup (
fig.3
) below. Be sure
that the couplers are set up so that the air hose is
depressurized when adding or removing components
from the system.
AIR SOURCE
The FNC1590 is designed to operate on clean,
dry, compressed air, regulated at 70 - 120 psi /
483 to 827 kPa / 4.8 to 8.3 bar (max. 120 psi /
827 kPa / 8.3 bar). The preferred system (
fig.3
)
would include a filter, a pressure regulator, and
an automatic oiler located as close to the tool as
possible (within 5 meters (15 feet) is ideal). Do not
use bottled air or gases.
Determine if it is necessary to lubricate. All
compressed air contains moisture and other
n
n
FUNCTIONAL DESCRIPTION
Nailer
Air Hose
Regulator
Air Supply
Filter
Oiler
