ENGLISH
FRANÇAIS
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using pneumatic tools, basic
safety precautions should always be followed to
reduce the risk of personal injury.
READ
ALL
INSTRUCTIONS BEFORE USING THIS
TOOL
We strongly recommend that this tool not be modified
and /or used for any application other than that for
which it was designed. If you have any questions
relative to its application, do not use the tool until you
have written or called us and we have advised you.
SAFETY GLASSES:
To prevent eye injuries, the
tool operator and all persons in the work area
must wear approved safety glasses to ANSIZ87.1
specifications with permanently attached, rigid side
shields.
EAR PROTECTION:
Wear ear protection to
safeguard against possible hearing loss.
DRESS SAFELY.
Protective gloves and non-skid
footwear or safety shoes are recommended while
working with and operating this tool. Do not wear
loose clothing or jewelry. Contain long hair.
USE CLEAN, DRY, REGULATED, COMPRESSED
AIR
at 70 to 120 psi / 483 to 827 kPa / 4.8 to 8.3
bar.
DO NOT CONNECT TOOL
to pressure which
potentially exceeds 180 psi / 1241 kPa / 12.4 bar.
AIR HOSE:
Use only hose that is rated for a
minimum working pressure of 150 psi or 150%
of the maximum system pressure, whichever is
greater. Check that connections are tight.
NEVER USE OXYGEN, CARBON DIOXIDE,
combustible gases or any other bottled gas as a
power source for this tool. Explosion and serious
personal injury could result.
COUPLINGS:
Connect tool to air supply hose with
a 1/4” NPT coupling that removes all pressure from
the tool when the coupling is disconnected.
DISCONNECT TOOL FROM AIR SUPPLY HOSE
before doing any disassembly, maintenance,
clearing a jammed fastener, leaving the work area,
moving the tool to another location, or handing the
tool to another person.
1.
2.
3.
4.
5.
6.
7.
8.
9.
